QueTek
  
Secure Site  
Back to Table of Contents

Striping Block Size

On RAID volumes, data is written in stripes across all drives. You need to supply the size of a block in a stripe. Software-based RAIDs always use a block size of 64 kilobytes. Hardware-based RAIDs usually use 64 kilobytes as the default size unless a different size was chosen during initial RAID setup. If the block size is not known, you may want to consider our RAID analysis service.

Striping block size

Selects a block size.

Data blocks per barity group

This value should be 16 for the HP (formerly Compaq) RAID controllers and 1 for all others.


Back to Table of Contents